Furnace Repair in Hobart, Indiana
24/7 furnace repair for every brand in Hobart, Indiana, with a diagnosis and a clear price before any work begins.
Furnace Repair in Hobart, Indiana
Older furnaces tend to fail in predictable ways: ignitors that crack, flame sensors that foul, blower motors that wear out, and inducers or pressure switches that no longer prove draft. Many of these furnaces can be repaired and kept running safely, as long as the technician diagnoses the problem instead of just quoting a replacement.
Apex repairs every make and model, whether or not we installed it. On an older furnace the diagnosis includes a heat exchanger check, because a cracked one is a carbon monoxide risk and not something to patch around.
Emergency furnace calls in Hobart are answered around the clock, and we do our best to get to you the same day when possible. We repair Armstrong, Lennox, Carrier, Trane, and Goodman furnaces, along with other major brands.
When a furnace is near the end of its life, we tell you plainly and give you the numbers for both repair and replacement. Our Hobart furnace installation service starts with an honest look at what you have.
If your furnace is not heating, call 219-299-7134 any time, day or night.

Licensed, Bonded & Insured
All Major Brands Repaired
Emergency Service
Competitive Pricing
Common Furnace Problems in Hobart Homes
Furnaces that have been running for many winters tend to fail in predictable ways. These are the repairs we make most often on mid-age and older furnaces, and what they usually mean.
Failed ignitor or flame sensor
Ignitors crack with age and flame sensors get coated with residue. Either one can keep the furnace from lighting or make it shut off a few seconds after it starts. Both are common, inexpensive repairs when they are caught early.
Pressure switch and draft inducer faults
A furnace that keeps shutting down on its pressure switch usually has a venting or inducer problem behind it. Replacing the switch alone just moves the failure to the next cold night, so we check the draft first.
Worn blower motor or capacitor
A blower motor that is wearing out draws more current and moves less air. You may notice weak airflow, a motor that hums without starting, or a furnace that overheats and shuts down.
Limit switch keeps tripping
The limit switch shuts the furnace down when it overheats. When it trips repeatedly, the real problem is usually restricted airflow, such as a clogged filter or blocked returns, not the switch itself.
Venting and chimney concerns
Older furnaces often vent into a chimney, sometimes one shared with the water heater. Poor draft, rusted vent pipe, or soot are signs the venting needs a closer look, because combustion gases should never end up inside the home.
Heat exchanger concerns
A cracked heat exchanger is a carbon monoxide risk and the one problem that should not be patched around. We check it as part of the diagnosis on older furnaces.
What to Expect When You Call Apex in Hobart
Apex specializes in forced-air gas furnaces. Every repair starts with a full diagnosis rather than a parts swap. A furnace that keeps shutting down on its pressure switch usually has a venting or inducer problem, and replacing the switch alone just moves the failure to the next cold night.
What a Hobart furnace repair call looks like:
- You call us. Emergency calls are answered around the clock.
- We diagnose the problem. That includes a heat exchanger check on older units, and we explain what we find.
- You get the price first. No work starts until you approve a clear price.
- We make the repair. We work on Armstrong, Lennox, Carrier, Trane, Goodman, and other major brands.
- You get an honest answer. If an older furnace is not worth more money, we say so.
Call 219-299-7134 or reach out through our contact form.

Repair or Replace an Older Furnace?
We repair a furnace when it can be repaired safely. Age alone is not a reason to replace one, and a cracked heat exchanger is. Replacement is usually worth a look when:
- The furnace is 15 years old or more and repairs are getting more frequent
- The heat exchanger is cracked, which is a safety issue
- The venting or chimney is in poor condition
- Energy bills keep climbing, or some rooms never get comfortable
You get a straight answer and the numbers for both options, so the decision is yours. If replacement makes sense, see our furnace installation in Hobart. Financing is available for larger repairs and full replacements.
Furnace Repair in Hobart and Nearby
Apex repairs furnaces in Lake County as well as Porter County. We also provide furnace installation in Hobart, AC repair in Hobart, and AC installation in Hobart. See our Hobart heating and cooling page for everything we do locally. We also repair furnaces in Merrillville, Lakes of the Four Seasons, and Portage.
Furnace Repair Questions in Hobart, Indiana
-
Will you repair an older furnace in Hobart, or just recommend replacing it?
We repair it if it can be repaired safely. Age alone is not a reason to replace a furnace. A cracked heat exchanger is. We check for that on any older unit and give you a straight answer either way, with the numbers for both options.
-
Is it safe to run an older furnace that shares a chimney with my water heater?
It can be, when the venting is in good condition and draws properly, but a technician should confirm that. Rust on the vent pipe, soot, or a water heater that does not draw well are signs of trouble. If you smell gas or suspect carbon monoxide, get everyone outside and call 911.
-
Do you offer 24/7 furnace repair in Hobart, Indiana?
Yes. Emergency furnace calls in Hobart are answered around the clock. For no-heat situations we do our best to get to you the same day when possible.
-
Which furnace brands do you repair in Hobart, IN?
We repair every major brand, including Armstrong, Lennox, Carrier, Trane, and Goodman, regardless of who installed the furnace.
-
How do I know if my furnace needs repair or replacement?
Age and repair history matter most. Many furnaces last about 15 to 20 years. If yours is in that range and needs repairs more often, a replacement may make more sense than another repair. A cracked heat exchanger, a flame that is mostly yellow instead of blue, or any gas or carbon monoxide concern is a safety issue: turn the furnace off and call for service.
-
How often should I change my furnace filter?
You should replace the air filter in your furnace on a regular basis. Dirty air filters reduce the amount of air flowing through a system and make the furnace work harder to maintain the temperature. How often you change the filter depends on the type of filter you use, if you have pets and the size of your equipment.
Please give us a call and we can give you proper guidance. 219-299-7134

What Our Customers Say About Us
"Very nice, knowledgeable, and responsive. helped us with our furnace issue and even pointed out a concern with our water heater that could've lead into a bigger problem. fair pricing. will absolutely recommend to friends and family. Thank you Ed!"
Contact us any time
Contact us any time
We will get back to you as soon as possible.
Please try again later.






